• For Journalists, Vloggers, YouTubers
• 2 x Omni Lav Mics & Built-In Omni Mics
• 2 x Ultracompact Clip-On Transmitters
• Ultracompact Dual-Channel Receiver

• For Videographers, Journalists, Vloggers
• 2 x Omni Lav Mics & Built-In Omni Mics
• 2 Ultracompact Clip-On Pro Transmitters
• Ultracompact Dual-Channel Pro Receiver

• Dual Stereo Condenser Mics - 360° Adjustable Pattern
• Secondary mini-XLR / standard-XLR input with +48V Phantom Power Preamp
• Compatible with the SM-LV600 Lavalier Microphone, Perfect for Interviews
• 1 Year Saramonic Warranty

DK6A
Compatible Brands:SARAMONIC/RODE/BOYA/SENNHEISER/TASCAM/ZOOM
Connector:3.5mm locking type

• For Interview and Speech Applications
• Omnidirectional Polar Pattern
• 50 Hz to 18 kHz Frequency Range
• 3.5mm TRS/TRRS Combo Connector

•  Audio Output Connector: Apple MFi Certified Lightning Connector
•  AD Conversion: Multibit DeltaSigma
•  Transducer Principle: Pre-Polarized Condenser Microphone
•  Polar Pattern: Omnidirectional
•  Gain: 0-35 dB
•  Sampling Frequency: 44.1kHz / 48 kHz
•  Bitrate: 16Bit / 24Bit
•  Frequency Response: 30Hz ~ 20kHz
•  Sensitivity: -42 +/- 3dB
•  Power: Supplied by iOS
•  Connector: MFi Certified Lightning Output Connector for iOS Devices
•  Cable Length: 1.7m  
•  Weight: 25g

Saramonic RX9 Dual-Channel Receiver for UWMic9 System

• For iPhone,iPad,IPod Touch,etc
• Small size and lightweight
• Plugs into standard 3.5mm audio jack
• Frequency Range:35Hz~20KHz
• No batteries required
• Signal/Noise 74dB SPL

• Compact and Lightweight Audio Mixer
• +48V Phantom Power for Condenser Mics
• Mini-XLR Input
• Two 1/8" Stereo Mic/Line Inputs
• 1/8" Stereo Line Output to Device
• 1/8" Headphone Monitor Output
• Independent L/R Level Meters
• Play/Rec Monitor Switch
• Includes 2x Plug-In Power Condenser Mics
• Device Holder, Hand Grip, and Cables

• XLR microphone input connector
• +48V phantom power for use with condenser microphones
• 3.5mm Headphone output for monitoring
• On/Off/+48V switch
• Gain control
• Power/Phantom Power provided by 9V battery

• 2 Independent Channels
• Two XLR Microphone Inputs
• Two 3.5mm (TRS) Microphone Inputs
• Two 1/4" Guitar Inputs
• Gain Control Knobs for Each Channel
• +48V Phantom Power Switch
• Mono/Stereo Output Switch
• Output Switch for Smartphones (TRRS) or Camera/Camcorder/Recorder (TRS)
• 3.5mm Headphone Output Jack for Monitoring

• -10 dB Pad

Attenuates the microphone input to allow the recording of loud sounds without clipping.

• 200Hz High-Pass Filter

Rejects infrasonic rumble like HVAC system and other low-frequency noises to acquire dependable sound quality.

• 48V Phantom Power or AA Battery Supply Power

It offers selectable power solutions via 48V phantom power or AA battery.

• Solid Brass Construction

Prevents radio-frequency (RF) interference for clean sound.

• Gold-Plated XLR Connector

Resists corrosion and ensures excellent signal transfer.

• Combine Two Mics to One Stereo Output
• Sum a Stereo Input to a Mono Output
• 3.5mm (1/8") Mono and Stereo Inputs
• 3.5mm (1/8") Stereo Output
• Left and Right Trim Controls
• Mono/Stereo Output Mode Switch
• Passive Design Requires No Power Source

• For iOS and Android Smartphones
• Expandable Locking Mechanism
• Foam Padded Handle
• Helps Stabilize Your Video

• Virtually unbreakable, crush and impact-proof case
• Airtight, protecting valuable gear from water, dirt and dust with IP67 rating
• Pickable cubed foam inserts for to accommodate any configuration 
• 10.75 x 7.2 x 3.56" (273 x 183 x 90.5mm) interior dimensions

• Type: Dynamic
• Pick-up Pattern: Cardioid / Unidirectional
• Frequency Response: 100Hz ~ 10kHz
• Sensitivity: 0° -52.4dB (+/- 3dB)
• Output Impedance: 500 ohm (+/- 30% @ 1kHz)
• Connector: Standard 3-pin XLR
• Dimensions (Diameter x Length): 2 x 10.1" (51mm x 258mm)
• Weight: 11.2 oz. (320g)

Specifications:

• Polar Pattern: Omnidirectional
• Frequency Range: 30Hz ~ 18kHz
• Output Impedance: 22k Ohm
• Typical Signal to Noise Ratio: 74 dB
• Sensitivity: -30 dB /-3dB / 0dB = 1V/Pa, 1kHz
• Maximum Output: 120 mV
• Dynamic Range: 120 dB typical Mic
• Dimensions: 0.33" x 0.33" (8.4 x 8.4mm)
• Cable Length: 48" (1220 mm)

• Clip-on Mic for iPhone and Android devices
• Omnidirectional microphone
• Improved sensitivity and Signal-to-Noise
• Works with many recording Apps
• Mic clip for securing microphone to clothing
• Removable pop shield included
• Includes a 13 feet (4m) 1/8’’ TRRS Female to Male extension cable

• For DSLR Cameras and Camcorders
• Low-Cut Filter
• 1/8" Headphone Output
• +10 dB Audio Gain Switch
• On/Off Switch
• 75 Hz to 18 kHz Frequency Range
• Runs on a Single AAA Battery
• Integrated Shockmount and Shoe Mount

• For DSLR Cameras and Camcorders
• 2 x Balanced XLR Inputs
• 2 x 3.5mm TRS Inputs
• 2 x 1/4" Inputs
• Dual Gain-Control Knobs
• 3.5mm TRS Output
• 3.5mm Headphone Monitoring
• Runs on 9V Battery
• 48V Phantom Power

• Microphone Type: Mono Condenser
  Polar Pattern: Super-Cardioid
  Frequency Range: 80 Hz - 12 kHz
  Sensitivity: -32dB +/- 1dB
  Signal to Noise Ratio: 70dB SPL
  Output: 3.5mm TRS
  Dimensions: 6.3 x 2.3 x 1.6" (16.2 x 5.9 x 4.1cm)

• For Shotgun Microphones
• Fits Mics Measuring 19-25mm in Diameter
• Built-In Cold Shoe Mount
• 1/4"-20, 3/8"-16 & 5/8" Threads
• For Cameras, Tripods, Stands & Boompoles

Technical Specifications
• Acoustic principal: Line gradient
• Directional pattern: Cardioid
• Frequency range: 40-20k Hz (selectable HPF 150 Hz)
• Sensitivity: -35 +/- 3dB (OdB = 1V/Pa @ 1 KHz) 1.5V 2.2Ko
• Sound impedance: 200 Ohm
• Maximum output: 10 dBu (at 1 KHz 1% THD into 1 KOhm)
• Dynamic range: 119 dB (per 1EC651)
• Maximum SPL: 135 dB
• Signal to noise ratio: 75 dB SPL (per 1EC651)
• Power: 48V phantom power; built-in lithium battery (battery life: 150 hours)
• Output connection: 3-pin XLR, balanced output between Pin 2 (+) Pin 3 (-) and Pin 1 (ground)
• Dimensions: 2.3 x 2.3 x28.2cm

• Acoustic Principle: Line gradient
• Directional Pattern: Cardioid
• Frequency Range: 20 Hz to 20 kHz
• Sensitivity: -30 +/- 3dB
• Output Impedance: 200 ohm
• Max Output: 10 dBu
• Dynamic Range: 120 dB
• Max SPL: 145 dB
• Signal to Noise: 80 dB SPL
• Power Options: 48V Phantom or internal lithium battery
• Battery Life: 150 Hours
• Output Connector: 3-pin XLR (Balanced)
• Dimensions: 15.5 x .9 x .9" (39.5 x 2.3 x 2.3cm)
• Weight: 7.7 oz (219g)

• Connect 3.5mm Mic to Smartphone/Tablet
• For iOS and Android
• Gold-Plated Connectors
• 3.5mm Female TRS to 3.5mm Male TRRS

• Super-cardioid polar pattern
• integrated shock mount system
• Low cut filter(75 Hz)
• Three position level control(-10dB,0dB,+20dB)
• LED power on/low battery indicator
• Foam and furry windshield are included
• Sturdy ABS construction
• Integrated 3.5mm output cable
• Powered by two batteries

• For XLR Microphones
• Records 24‑bit/48 kHz Wav Audio to MicroSD Cards up to 32GB
• +48V Phantom Power; Input audio gain control; Switchable low‑cut filter; 3.5mm headphone monitoring output
• Easy‑to‑use menu and LCD display; Lightweight All‑Metal Construction; Powered by 2 "AA" Batteries

• Channel number: 96 Channel
• group: A and B
• Oscillator type: PLL Synthesizer Carrier frequencies: 514 MHz - 596 MHz
• Reference deviation: +/-5 kHz (-60 dBV, 1 kHz input)
• Signal to noise ratio: 70 dB or more
• Spur suppression: -60 dB
• Voice delay: 12 ms
• Antenna: 1/4 wire antenna
• Reference audio input level: -60 dBV (MIC input, 0 dB attenuation)
• RF output level: 30mW/20mW/10mW
• selectable Distortion: 0.5% or less
• Weight: Approx. 338.2g (excl. batteries)
• Battery: 2 AA size batteries
• Dimensions: 254 x 52 x 52mm

Specifications:
Channels: 96
Groups: A and B
Oscillator type: PLL synthesizer
Output: 3.5mm mini jack
Antenna: 1/4 wire antenna
Audio output level: -60 dBV
Headphone output level: 30mW (16 ohm) 
Frequency Range: 514 MHz - 596 MHz
Sensitivity: -95 dBm
Signal to noise ratio: 70 dB or more Voice delay: 12 ms Reference deviation: +/- 5 kHz Frequency response: 40 Hz to 18 kHz (+/- 3dB) Distortion: 0.5% or less Spur suppression: -60 dB Weight: 218.7g (w/out batteries) Battery: 2 AA size batteries Dimensions: 170.9 x 63.5 x 30.0 mm 
 

Specifications 
Type: Condenser Microphone (Unidirectional) 
Polar Pattern: Super-cardioid 
Frequency Response: 35-20kHz 
Sensitivity: -40dB +/- 1dB / 0dB+1V/Pa. 1kHz 
Signal to Noise Ratio: 75dB or more 
Output Impedance: 200 Ohm or less 
Power: Two AA Batteries 
Plug: Mini-jack 3.5mm 
Mounting Options: Standard Camera Shoe or 1/4" Thread 
Dimensions (L*H*D): 10 x 2.6 x 3.1" x (255 x 66 x 80mm) 

• Supercardioid polar pick up pattern
• Records 16-bit/48 kHz wav audio to MicroSDHC
• Easy-to-use menu system and LCD display
• Switchable low-cut filter
• 3.5mm headphone monitor output
• Standard size shoe mount
• Lightweight all-metal construction

• 2.4GHz wireless transmission technology
• Compatible with cameras, mobile devices and more
• Clip-on transmitter with built-in Omnidirectional microphone
• Dual-channel receiver with 3.5mm output
• High resolution and easy-to-use LCD display
• Auto brightness adjustment & auto gain control
• Low cut filter (160Hz/120Hz/80Hz)
• 3.5mm headphone jack for real-time monitoring
• Built-in rechargeable battery provides up to 6-hour runtime
• Selectable mono and stereo output
• Operating range of up to 200m