- Durable and lightweight
- Converts 100mm bowl tripods to flat base
- Easy to install and use
- Telescoping Microphone Boompole
- 5-Section, Aluminum Pole
- Extends from 34.5 to 138"
- 1/4"-20 and 3/8"-16 Mounts
Converts 75mm Bowl Tripods to Flat Base
Height : 110mm / 4.3in
Net Weight : 215g / 0.5lbs
75mm bowl to flat adapter
Height : 100mm / 4in
Net Weight : 230g / 0.5lbs
Material : Aluminium
Maximum Length : 2600mm/102"
Minimum Length : 820mm/32"
Section : 4
Net weight : 760g/1.7lbs
Maximum Diameter : 32mm/1.3"
- Weight without handle : 350g
- Weight with handle : 630g
- Dimension : 225x425x110mm
- wide and smooth frequency response
- High sensivity
- Compact and lightweight
- integrated shoe mount with 3/8" thread
- suitable for all cameras
- Folded height: 600mm
- Working height : 550mm-930mm
- Bowl size : 150mm
- Weight : 6.6kg
- Payload : 100kg
- GA230 Tripod
- GH03F Fluid Head with Flat Base
- Tripod Height Range: 33.1 to 90.6"
- Tripod Folds Down to 35"
- Geared Center Column with Lever
- Rubber Feet with Retractable Spikes
- Fluid Head Supports up to 11 lb
- Easy-Lock Baseplate
- Fixed Counterbalance
- Separate Pan and Tilt Locks
- Bowl Size : 75mm
- Fluid Head : GH06
- Tripod : GA752
- Spreader : GS01 middle spreader
- Bag : SC-1
- Payload : 6kg
- Height Range : 77.5cm~171 cm / 30.5in~67.3in
- Transport Legth : 86cm / 33.9in
- Net Weight : 5.6kg / 12.3lbs
- Bowl Size : 100mm
- Fluid Head : GH20
- Tripod : GA101
- Spreader : GS02 ground spreader
- Bag : T30
- Payload : 20kg
- Height Range : 79cm~156cm / 31.1in~61.4in
- Transport Length : 100.5cm / 39.6in
- Net Weight : 8.4kg / 18.5lbs
- Fits E-Image Tripods with Dual Spikes
- 132 lb Load Capacity
- Non-Marring 4" Rubber Wheels
- Individual Wheel Brakes
- 37" Working Base Diameter
- Folds for Transport
- Material: Aluminum alloy
- Loading capacity: 17.6 lbs (8 kg)
- Tilt Range: -45/+90 degrees
- Pan Range: 360 degrees
- Maximum Height: 63.8" (162cm)
- Minimum Height: 30.7" (78cm)
- Folded Length: 32.7" (83cm)
- Leg Sections: 3
- Bowl Size: 75mm
- Weight: 11.0 lbs (5 kg)
- Payload : 12kg
- Bowl size : 100mm
- Height range : 84.5cm-169cm
- Net weight : 6.8kg
- Dual 75/100mm Bowl
- For Select E-Image Tripod Heads
- Aluminum Alloy Construction
- Load Capacity of 110 lb
- Weighs 7 lb
- Height Range 15" to 28"
- Dual Spiked Feet
- Adjustable Ground Level Spreader
- Individually Adjustable Legs
- Includes Carry Bag
- Small clamp with firm grip that works well with the Magic Arm.
- Comes with 1/4" and 3/8" screw holes.
- Fits 100mm Tripod or Hi-Hat Bowls
- Allows Use of 75mm Ball Heads
- Anodized Aluminum Construction
- Offers flexible and secure mounting
- Easy to attach and use
- Durable and lightweight construction
- Secured by 3 high payload suction cups
- Single locking mechanism locks all three points of articulation
- Rod mount will attach to any standard 15mm rod
- Magic Arm may be attached to any 15mm rod clamp
- Anti-rotation mounting bracket
- Wing shape locking knob provides quick locking
- Heavy Duty Mount for Monitors and other Accessories
- 1/4"-20 Threads on Both Sides
- Includes Cold Shoe Mount Adapter
- Center Wing Nut Features Locking Teeth for Increased Holding Capacity
- Heavy Duty Mount for Monitors and other Accessories
- 1/4"-20 Threads on Both Sides
- Center Wing Nut Features Locking Teeth for Increased Holding Capacity
- Compact Size
- 1/4"-20 Threads on Each End
- End-Joints Articulate 180°
- Bowl Size : 75mm
- Fluid Head : EH630
- Tripod : AT630
- Spreader : GS01 middle spreader
- Bag : SC1
- Payload : 4kg / 8.8lbs
- Height Range : 76cm~167cm / 30in~65.7in
- Transport Lenght : 85cm / 33.5in
- Net Weight : 4.8kg - 10.6lbs
- Bowl size : 75mm
- Fluid Head : EH650
- Tripod : GA752S
- Spreader : GS01 middle spreader
- Bag : SC-1
- Payload : 5kg / 11lbs
- Height Range : 77.5cm~168.5cm / 30.5in~66.3in
- Transport Length : 86cm / 34in
- Net Weight : 4.1kg / 9lbs
- Always maintain the best visual angle without a single rock.
- The shoulder pad is laser cut from a durable adhesive backed water resistant foam.
- EX3-PLATE is machined from aluminum, given a machine finish and anodized for scratch resistance and durability.
- It supports Anton-Bauer Gold mount plates, V-lock battery mount plates.
- Pan follow
- Free follow
- Lock follow
- Sport follow
- Dream Rotation follow
- Time-lapse and Motion lapse
- Lower angle shooting
- Angled Motor Arm; 7 lb Payload
- 360° Pan/Roll and 270° Tilt Rotation
- Five Modes Including Dream Follow
- 501PL Standard Quick Release Plate
- Payload : 3kg
- Maximum Height : 201cm
- Minimum Height : 75cm
- Net weight : 2210g
- Payload : 3kg
- Maximum Height : 201cm
- Minimum Height : 75cm
- Net weight : 2030g
- Payload : 4kg
- Maximum Height : 212cm
- Minimum Height : 80cm
- Net height : 2820g
A mounting bracket to mount a DSLR camera onto E-Image ES or iFootage Shark sliders Compatible with all of the E-Image ES sliders and the iFootage Shark slider.
E-Image MK36 with 15mm Rod Support System with 44cm/17.3inch length, providing space to mount accessories on the rods, accommodating various lenses and accessories. Features our P6 quick release plate, thumbscrews for each rod. The camera- and tripod-mounting plates have both 1/4"-20 and 3/8"-16 threaded holes.
Internal Main Compartment
- 35cm/13.8''(L)
- 18cm/7.1"(W)
- 41cm/16.1"(H)
External Max.Size
- 36.5cm/14.4"(L)
- 30.5cm/12"(W)
- 48.5cm/19.1"(H)
- Internal dimension : L33cmxW14cmxH45cm
- External dimension : L54cmxW34cmxH58.5cm
- Fabric : Water-proof wearable 1680D nylon
- For Video Production and Broadcast
- Hypercardioid Polar Pattern
- 40 Hz to 16 kHz Frequency Response
- Bass Roll-Off Switch
- For Film, Radio, Television
- Hyper-Cardioid Pattern
- All-Metal Body, Black Finish
- 40Hz—16kHz Frequency Response
- Includes Foam Windscreen
- Built-in low-frequency cutoff switch
E-Image PS-C Camera Plate is compatible with cameras that accept a VCT-14 quick-release tripod adapter, and is for use with Sony HDC, BVP and DXC series cameras, HDW, MSW, DVW, DNW, and DSR series camcorders, and Panasonic professional camcorders. It features an integrated safety release, lessening the chance of accidental camera separation from tripod. It features seven 3/8"-16, and five 1/4"-20 threaded mounting holes for attaching the QR plate to a tripod.
• Magic PT-S2 in Small size with 8 kg payload and ø15mm rode system for DSLR & small camcorders
- Lightweight Aluminum
- Rubber handle grips for comfort
- Multiple 1/4-20″ and 3/8-16″ threads for mounting
- Mount for a V-Mount battery